1. Plug the Super Bridge into power.
2. Connect an Ethernet cable from your router to Super Bridge.
3. Allow about five minutes for the device to boot up.
4. Using a computer on the same network, open a web browser and visit the Super Bridge device registration page: bridge.superhome.com.au/register (Gmail ID recommended).
5. Once your Super Bridge is registered, click on the device. This will direct you to the local address of your Super Bridge (http://IPaddress_of_bridge:8081).
6. Select the home controller you have (Fibaro, Vera, etc).
7. Provide the details for your home controller and enable the services you want to use. You can add services later if needed.
8. Hit save and allow the device to reboot automatically.
9. After reboot, all devices connected to your home controller will be visible on the Super Bridge user interface.
10. Enable your devices to be used with respective services.
11. Assign a static IP address to your Super Bridge. This processes provides additional security and stability.
If you are having issues connecting to any of your home automation devices, send our developers an email: info@superhome.com.au. Our team will continue to develop Super Bridge compatibility as new technologies launch!