Fibaro Dimmer 2

$119.00

Fibaro Dimmer 2 is designed to work with many light sources. It enables control of lights by Z-WAVE and is easily incorporated into existing wall switches.

In stock (can be backordered)

Add Bypass

Found this product at a lower price?
SKU: FGD212
Categories: , ,
Tags: , , ,

Share on:

  • Description

Description

Fibaro Dimmer 2 is designed to work with many light sources. It enables control of lights by Z-WAVE and is easily incorporated into existing wall switches.

The Fibaro unit automatically senses connected devices, features automatic overload protection switch-off and soft start function. Works as a dimmer or as a connector, with two-wire or three-wire cables.

The Fibaro Dimmer utilizes MESH technology and re-transmits your instructions to other Z-WAVE controlled units.

Our product is considered to be the SMALLEST of its type in the world.

As a dimmer, our product is compatible with:

  • 230V operated conventional incandescent lamps,
  • 230V operated halogen lamps,
  • 12V operated MLV halogen lamps,
  • dimmable LED bulbs,
  • dimmable compact florescen CFL tube lamps,
  • using Bypass 2, with supported dimmable light source up to 250W.

As a connector, works with:

  • Compact fluorescent CFL tube lamps with electronic ballast,
  • LED lamps,
  • Old type fluorescent lamps,
  • using Bypass 2, with supported light source up to 250W.

Please note, this device must be installed by a licensed electrician. Before contracting an electrician please check that they provide a warranty and electrical compliance certificate.

You must provide a installation compliance certificate from your electrician for warranty claims .

Extended features of Fibaro Dimmer 2:

  • Integrated LED status light which changes color based on the level you are in inside the configuration menu. It also indicates faults in the circuit

led-dimmer

  • Active power and energy metering functionality
  • Auto calibration
  • Smart light source detection

Technical Data for the Fibaro Dimmer:

  • Power source 230V +/-10%, 50Hz
  • Output power 50-250W (resistive loads), 50-200 VA (resistive-capacitive or resistive-inductive loads)
  • mounted in standard wall switch boxes fi >= 50mm
  • Outside dimensions (L x W x H) 42mm x 36mm x 15mm
  • Radio protocol and frequency: Z-Wave 921.42mhz
  • Antenna range: up to ca. 50 meters outdoor, or up to 30 meters inside (depends on building structure)
  • Works with momentary, toggle, three-way switches
  • Overcurrent protection: required external 10A circuit breaker
  • Using bypass 2 reduces the minimum power of the load and prevents LED lights from flickering
  • Z-Wave Plus certification

Note: Do NOT use Fibaro Dimmer 2 with old Fibaro bypass 1 (FGB-001), it may damage your dimmer.

Please note, this device must be installed by a licensed electrician.

Dimmer 2 uses different operating modes to control following
types of loads:
1. „Trailing edge” for resistive loads (R)
2. „Trailing edge” for resistive-capacitive loads (RC)
3. „Leading edge” for resistive-inductive loads (RL)

Download Fibaro Dimmer 2 Manual

Fibaro Dimmer 2 Loads