Shopping Cart
There are no more items in your cart
Aeon Labs Micro Smart Switch (2nd Edition)
The Aeon Labs Micro Smart Energy Switch is a low-cost Z-Wave appliance switch specifically used to enable Z-Wave command and control (on/off) for existing in-wall switches.
It can also report immediate wattage consumption or kWh energy usage over a period of time.
The wireless module is powered from the mains supply and is a three-wire design which requires a neutral connection.
It also is a repeater in the Z-Wave network. Acting as a bridge for communication, it will forward Z-Wave command messages to their destinations if the originating controller is out of range from the destination node.
By taking advantage of the Z-Wave mesh network, commands can be routed to their destination via intermediary “listening” Z-Wave products. Products that are Z-Wave certified can be used and communicate with other Z-Wave certified devices.
Name: Micro Smart Switch G2
- Model number: DSC18Power input: 240VAC, 50/60Hz.Minimum Power (Watt): No minimum powerRated output: Max 10A.
Max standby power: <0.8W.
Power measurement accuracy: + or - 3W (Micro Smart Switch G2 DSC18 only).
Dimensions: 50 x 50 x 18 mm (2 x 2 x 0.7 in)
Operating temperature: 0℃ to 40℃
Relative humidity: 8% to 80%.
Repeater: YesOperating distance: Up to 100 metres outdoors. Supported Loads: Resistive loads only
- AU: 230V 50Hz input, 2300W or 10A max output.
- Smart Device Type
- 0
- Automation System
- 0
No reviews
Comments (0)
No customer reviews for the moment.