Fibaro Double Relay Switch
FIBARO Double Relay Switch - Fibaro designed it install in standard wall switch boxes or anywhere else where it is necessary to control up to 2x 1.5Kw devices.
As with all other Actors, FIBARO Relay Switch allows to control connected devices either via the Z-Wave network or via a switch connected directly to it.
Features
- Compatible with any Z-Wave Controller
- Advanced microprocessor control
- Executive element – electromagnetic, micro-gap relay switch
- May be operated by momentary or toggle switches
- To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations
Therefore you can use this device with all devices certified with Z-Wave certificate and should be compatible with such devices produced by other manufacturers.
In conclusion, you can measure and log the energy used by the connected load to help reduce your power bills and save money.
Technical data
| Power supply: |
110-240 V AC, 50/60 Hz |
| Rated load current: |
6,5A per channel for resistive
load, but total current can not
exceed 10A |
| Power consumption: |
up to 0.8W |
| Overcurrent protection: |
required external 10A circuit breaker |
| Active Element: |
micro-gap relay switch μ |
| Operational temperature: |
0-35°C |
| Active element: |
micro-gap relay switch μ |
| Device control: |
remotely - radio waves
directly - push buttons |
| For installation in boxes: |
Ø ≥ 50mm, depth ≥ 60mm |
| Radio protocol: |
Z-Wave |
| Radio signal power: |
up to 1mW |
| Radio frequency: |
921.4 MHz ANZ; |
| Range: |
up to 50 m outdoors
up to 30 m indoors
(depending on building materials) |
| Dimensions: (L x W x H)): |
42.50 x 38.25 x 20.30 mm |
Also please note, a licensed electricial has to install this device. Yet before contracting an electrician please check that they provide a warranty and electrical compliance certificate .
Download FGS-222 Manual
