Double Switch 2
The Double Switch 2 can independently control two loads of up to 1.5KW (6.5A) to a total load of 10A all within a tiny device (43 x 38 x 22mm). Use this device to add any off/on device to the system and allow Fibaro to control intelligently.
The Double switch 2 is built on the Z-Wave 500 series chip meaning greater range and reliability plus give real-time energy consumption back to the Home Centre so you can see exactly what you’re spending and where.
Designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Double Switch 2 allows to control connected devices either via the Z-Wave+ network or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.
- Compatible with any Z-Wave or Z-Wave+ Controller
- 2x 1.5Kw Outputs
- Supports protected mode (Z-Wave network security mode) with AES-128 encryption
- Advanced microprocessor control
- Active power and energy metering functionality
- Works with various types of switches – momentary, toggle three-way, etc
- To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulation
You can use this device with all devices certified with the Z-Wave Plus certificate and should be compatible with such devices produced by other manufacturers.
FIBARO Switch2 is a Security Enabled Z-Wave Plus product and a Security Enabled Z-Wave Controller must be used in order to fully utilize these features.
